Home improvement can be great for the do-it-yourself homeowner, or the homeowner who likes to hire a professional to take on the project. Either way, you can’t go wrong with making repairs and doing some upgrading as long as you follow these tips and advice on how to avoid pitfalls and make the best decisions possible.
There are a few electrical tasks that a non-expert can do around the home. One is replacing a light switch. After you turn off the electricity and remove the cover plate, detach the wires on the old switch and replace them in the same order on the new switch.
Your porch might be in need of a fresh coat of paint. Make sure you apply a high quality exterior paint product. You should match the old paint, whether oil based or water based, if at all possible. Use oil paint on trim; it will last for a long time but you should not use it outdoors on flooring.
Stay true to the property and the neighborhood when you take on major renovations. If you live on a street of suburb ranch style homes, then putting in a colonial mansion is not going to get you the desired result you’re after. It will be out of place and not something anyone else will be willing to pay for later.
Take the time to find the studs before you start the install project for your new cabinets. This can be done easily with a stud finder and marked with a nail that will be behind the new cabinets anyway and not able to be seen. The studs are the only sturdy place you have to attach something to a wall.
Keep your partially used can of drywall compound from drying out between uses! All you have to do scrape and wipe the insides of the can down to the surface of the remaining drywall mud. Next, pour just enough water onto the mud to cover its surface. Before you use it again just pour off the water and it will be as good as new!
Update the lighting in your home to add brightness. Changes in lighting fixtures and adding additional wall lighting can bring a entirely new look to your home. Buy energy saving bulbs to reduce your overall energy costs and consider investing in a smart lighting system that will automatically turn off lights when not in use.
A common occurrence in many homes is a leaky shower head. This is caused by a defective or damaged O-ring inside of the head. To stop the leak, simply apply tape to the head, and twist the head off with a pipe wrench. Find an O-ring that fits your head and place it in. Place pipe sealer around the pipe threads and screw the head back on, with a final tightening from the pipe wrench. Then test the head for any further leaks.
Whether you are improving your own personal residence or an investment property that you will use for resale or renting, the tips we have discussed in this article will set you well on your way to higher property values as well as hassle free and financially responsible remodeling projects.